Switch User Manual

ACL Commands 275
Parameter Description
Parameter Description
srcmac Valid source MAC address in format xxxx.xxxx.xxxx.
srcmacmask Valid MAC address bitmask for the source MAC address in
format xxxx.xxxx.xxxx.
any Packets sent to or received from any MAC address
dstmac Valid destination MAC address in format xxxx.xxxx.xxxx.
destmacmask Valid MAC address bitmask for the destination MAC address in
format xxxx.xxxx.xxxx.
bpdu Bridge protocol data unit
ethertypekey Either a keyword or valid four-digit hexadecimal number.
(Range: Supported values are appletalk, arp, ibmsna, ipv4, ipv6,
ipx, mplsmcast, mplsucast, Netbios, novell, pppoe, rarp.)
0x0600-0xFFFF Specify custom ethertype value (hexadecimal range 0x0600-
0xFFFF).
vlan eq VLAN number. (Range 0-4095)
cos Class of service. (Range 0-7)
log Specifies that this rule is to be logged.
time-range-name Use the time-range parameter to impose a time limitation on
the MAC ACL rule as defined by the parameter
time-range-
name
.
assign-queue Specifies particular hardware queue for handling traffic that
matches the rule.
queue-id 0-6, where n is number of user configurable queues available for
that hardware platform.
mirror Copies the traffic matching this rule to the specified interface.
redirect Forwards traffic matching this rule to the specified physical
interface.
interface Valid physical interface in unit/slot/port format, for example
1/0/12.
2CSPC4.XCT-SWUM2XX1.book Page 275 Monday, October 3, 2011 11:05 AM