Switch User Manual

310 Address Table Commands
Syntax
show ports security addresses {gigabitethernet unit/slot/port | port-channel
port-channel-number | tengigabitethernet unit/slot/port }
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Examples
The following example displays dynamic addresses for port channel number
1/0/1.
console#show ports security addresses gigabitethernet
1/0/1
Dynamic addresses: 83
Maximum addresses: 100
Learned addresses
------- ---------
2CSPC4.XCT-SWUM2XX1.book Page 310 Monday, October 3, 2011 11:05 AM