Switch User Manual

Ethernet CFM Commands 449
Syntax
show ethernet cfm maintenance-points remote {level 0-7 | domain domain-
name
| detail [ mac mac-address | mep MEPId ] [domain domain-name |
level
0-7 ] [vlan vlan-id ]}
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC
User Guidelines
This command has no user guidelines.
Example
console# show ethernet cfm maintenance-points remove level 1
------ ------- ----- ----------------- ---- ----------------- -----------
MEP Id RMEP Id Level MAC VLAN Expiry Timer(sec) Service Id
------ ------- ----- ----------------- ---- ----------------- -----------
1 2 1 00:11:22:33:44:55 10 25 serv1
Parameter Description
domain Name of the maintenance domain (an alphanumeric string of
up to 43 characters in length).
level Maintenance association level
mac-address The destination MAC address for which the information is
desired.
vlan-id A VLAN associated with the maintenance domain. Range: 1-
4094.
mpid The MEP ID from which the link trace message is to be
transmitted.
2CSPC4.XCT-SWUM2XX1.book Page 449 Monday, October 3, 2011 11:05 AM