Switch User Manual

696 QoS Commands
show policy-map interface
Use the show policy-map interface command in Privileged EXEC mode to
display policy-oriented statistics information for the specified interface.
Syntax
show policy-map interface {gigabithethernet | tengigabitethernet
unit/slot/port } {in|out}
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the statistics information for port 1/0/1.
console#show policy-map interface 1/0/1 in
Interface..................................... 1/0/1
Operational Status............................ Down
Policy Name................................... DELL
Interface Summary:
Class Name.................................... murali
In Discarded Packets.......................... 0
Parameter Description
in Show inbound service policies.
out Show outbound service policies.
2CSPC4.XCT-SWUM2XX1.book Page 696 Monday, October 3, 2011 11:05 AM