Switch User Manual

704 RADIUS Commands
• FILTER-ID
– Name of the filter list for this user.
• TUNNEL-TYPE
– Used to indicate that a VLAN is to be assigned to the user when set to
tunnel type VLAN (13).
• TUNNEL-MEDIUM-TYPE
– Used to indicate the tunnel medium type. Must be set to medium
type 802 (6) to enable VLAN assignment.
• TUNNEL-PRIVATE-GROUP-ID
– Used to indicate the VLAN to be assigned to the user. May be a string
which matches a preconfigured VLAN name or a VLAN id. If a VLAN
id is given, the string must only contain decimal digits.
Commands in this Chapter
This chapter explains the following commands:
aaa accounting network
default start-stop group
radius
primary radius-server timeout
acct-port priority retransmit
auth-port radius-server deadtime show aaa servers
deadtime radius-server host show radius statistics
key radius-server key source-ip
msgauth radius-server retransmit timeout
name (RADIUS server) radius-server source-ip usage
2CSPC4.XCT-SWUM2XX1.book Page 704 Monday, October 3, 2011 11:05 AM