Switch User Manual

Command Groups 77
LLDP Configures and displays LLDP information.
Port Channel Configures and displays Port channel information.
Port Monitor Monitors activity on specific target ports.
QoS Configures and displays QoS information.
Radius Configures and displays RADIUS information.
Spanning Tree Configures and reports on Spanning Tree protocol.
TACACS+ Configures and displays TACACS+ information.
VLAN Configures VLANs and displays VLAN information.
Voice VLAN Configures voice VLANs and displays voice VLAN
information.
802.1x Configures and displays commands related to 802.1x
security protocol.
Layer 3 Commands
ARP (IPv4) Manages Address Resolution Protocol functions.
DHCP Server and Relay
Agent (IPv4)
Manages DHCP/BOOTP operations on the system.
DHCPv6 Configures IPv6 DHCP functions.
DVMRP (Mcast) Configures DVMRP operations.
IGMP (Mcast) Configures IGMP operations.
IGMP Proxy (Mcast) Manages IGMP Proxy on the system.
IP Helper/DHCP Relay Configures relay of UDP packets.
IP Routing (IPv4) Configures IP routing and addressing.
IPv6 Multicast Manages IPv6 Multicasting on the system.
IPv6 Routing Configures IPv6 routing and addressing.
Loopback Interface
(IPv6)
Manages Loopback configurations.
Multicast (Mcast) Manages Multicasting on the system.
OSPF (IPv4) Manages shortest path operations.
Table 1-1. System Command Groups
(continued)
Command Group Description
2CSPC4.XCT-SWUM2XX1.book Page 77 Monday, October 3, 2011 11:05 AM