Switch User Manual

802.1x Commands 843
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
console#clear dot1x authentication-history
Purge all entries from the log.
console#clear dot1x authentication-history gi1/0/1
Purge all entries for the specified interface from the
log.
802.1x Advanced Features
dot1x guest-vlan
Use the dot1x guest-vlan command in Interface Configuration mode to set
the guest VLAN on a port. The VLAN must already have been defined. The
no form of this command sets the guest VLAN id to zero, which disables the
guest VLAN on a port.
Syntax
dot1x guest-vlan vlan-id
Parameter Description
interface–id Any valid interface. See Interface Naming Conventions for
interface representation.
2CSPC4.XCT-SWUM2XX1.book Page 843 Monday, October 3, 2011 11:05 AM