Switch User Manual

Clock 101
Command Mode
Interface configuration (Ethernet, Port-Channel, VLAN) mode
User Guidelines
• Use the sntp client enable Global Configuration mode command to enable broadcast clients
globally.
• Use the
sntp anycast client enable Global Configuration mode command to enable anycast
clients globally.
Examples
The following example enables the SNTP client on the interface.
sntp unicast client enable
The sntp unicast client enable Global Configuration mode command enables the device to use the
Simple Network Time Protocol (SNTP) to request and accept Network Time Protocol (NTP)
traffic from servers. To disable requesting and accepting Network Time Protocol (NTP) traffic from
servers, use the
no form of this command.
Syntax
sntp unicast client enable
no sntp unicast client enable
This command has no arguments or keywords.
Default Configuration
Disabled
Command Mode
Global Configuration mode
User Guidelines
• Use the sntp server command to define SNTP servers.
Examples
The following example enables the device to use the Simple Network Time Protocol (SNTP) to
request and accept Network Time Protocol (NTP) traffic from servers.
Console (config)# sntp client enable
Console (config)# sntp unicast client enable