Switch User Manual

102 Clock
www.dell.com | support.dell.com
sntp unicast client poll
The sntp unicast client poll Global Configuration mode command enables polling for the Simple
Network Time Protocol (SNTP) predefined unicast clients. To disable the polling for SNTP client,
use the
no form of this command.
Syntax
sntp unicast client poll
no sntp unicast client poll
This command has no arguments or keywords.
Default Configuration
Disabled
Command Mode
Global configuration mode
User Guidelines
• Polling time is determined by the sntp client poll timer Global Configuration mode
command.
Examples
The following example enables polling for the Simple Network Time Protocol (SNTP) predefined
unicast clients.
sntp server
The sntp server Global Configuration mode command configures the device to use the Simple
Network Time Protocol (SNTP) to request and accept Network Time Protocol (NTP) traffic from a
server. To remove a server from the list of NTP servers, use the
no form of this command.
Syntax
sntp server ip-address | hostname [ poll ] [ key keyid ]
no sntp server host
• ip-address —IP address of the server.
•
hostname— Hostname of the server. (Range: 1 - 158 characters)
• poll — Enable polling.
•
key keyid— Authentication key to use when sending packets to this peer. (Range:1 –
4294967295)
Console (config)# sntp unicast client poll