Switch User Manual

Ethernet Configuration Commands 119
Ethernet Configuration Commands
interface ethernet
The interface ethernet Global Configuration mode command enters the interface configuration
mode to configure an Ethernet type interface.
Syntax
interface ethernet interface
• interface— Valid Ethernet port.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
• There are no user guidelines for this command.
Example
The following example enables ports g8 for configuration.
interface range ethernet
The interface range ethernet Global Configuration mode command enters the interface
configuration mode to configure multiple Ethernet type interfaces.
Syntax
interface range ethernet { port-range | all }
•
port-range— List of valid ports to add. Separate non consecutive ports with a comma and
no spaces; a hyphen is used to designate a range of ports.
•
all —All Ethernet ports.
Default Configuration
This command has no default configuration.
Console(config)# interface ethernet g8
Console(config-if)#