Switch User Manual

Ethernet Configuration Commands 131
The displayed port status information includes the following:
•
Port —The port number.
•
Description —If the port has a description, the description is displayed.
•
Port Type —The port designated IEEE shorthand identifier. For example, 1000Base-T refers to
1000 Mbps baseband signaling.
•
Duplex —Displays the port Duplex status.
•
Speed —Refers to the port speed.
•
Neg —Describes the Auto-negotiation status.
•
Flow Control —Displays the Flow Control status.
•
Back Pressure— Displays the Back Pressure status.
•
Link State —Displays the Link Aggregation status.
show interfaces description
The show interfaces description User EXEC mode command displays the description for all
configured interfaces.
Syntax
show interfaces description [ethernet interface | port-channel port-channel-number ]
•
interface— Valid Ethernet port.
•
port-channel-number —A valid port-channel trunk index.
Default Configuration
This command has no default configuration.
Command Modes
Privilege EXEC mode
User Guidelines
• There are no user guidelines for this command.
Example
The following example displays the description for the interface g1.