Switch User Manual

Line Commands 173
Line Commands
line
The line Global Configuration mode command identifies a specific line for configuration and
enters the line configuration command mode.
Syntax
line { console | telnet | ssh }
•
console —Console terminal line.
•
telnet —Virtual terminal for remote console access (Telnet).
•
ssh —Virtual terminal for secured remote console access (SSH).
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
• There are no user guidelines for this command.
Examples
The following example configures the device as a virtual terminal for remote console access.
speed
The speed Line Configuration mode command sets the line baud rate.
Syntax
speed bps
• bps —Baud rate in bits per second (bps). The options are 2400, 9600, 19200 and 38400.
Default Configuration
This default speed is 9600.
Console(config)# line telnet
Console(config-line)#