Switch User Manual

186 LLDP Commands
www.dell.com | support.dell.com
Command Modes
Privileged EXEC
User Guidelines
• There are no user guidelines for this command.
Example
The following example displays the Link Layer Discovery Protocol (LLDP) information that is
advertised from a specific port.
show lldp neighbors
To display information about neighboring devices discovered using Link Layer Discovery Protocol
(LLDP), use the
show lldp neighbors command in privileged EXEC mode.
Syntax
show lldp neighbors [ethernet interface]
•
Interface — Ethernet port
Command Modes
Privileged EXEC
User Guidelines
• There are no user guidelines for this command.
Example
The following example displays information about neighboring devices discovered using Link Layer
Discovery Protocol (LLDP).
Switch# show lldp local ethernet g1
Device ID: 0060.704C.73FF
Port ID: 1
Capabilities: Bridge
System Name: ts-7800-1
System description:
Port description:
Management address: 172.16.1.8