Switch User Manual

QoS Commands 213
Example
The following example sets queue 4, 3 to be expedite queues.
show qos interface
The show qos interface User EXEC mode command displays interface QoS data.
Syntax
show qos interface [ ethernet interface-number | queuing ]
•
ethernet interface-number —Ethernet port number.
•
queuing —Displays the queue strategy (WRR or EF), the weight for WRR queues, the
CoS to queue map and the EF priority.
Default Configuration
There is no default configuration for this command.
Command Mode
User EXEC mode
User Guidelines
If no keyword is specified with the show qos interface command, the port QoS mode (DSCP
trusted, CoS trusted, untrusted), default CoS value, attached to the port, attached to the
interface are displayed. If a specific interface is not specified, the information for all interfaces
is displayed.
Examples
The following example displays output from the show qos interface g1 queueing command.
Console (config)# priority-queue out num-of-queues 2