Switch User Manual

RMON Commands 233
• type type —The sampling method for the selected variable and calculating the value to be
compared against the thresholds. If the method is
absolute , the value of the selected
variable is compared directly with the thresholds at the end of the sampling interval. If
the method is
delta , the selected variable value at the last sample is subtracted from the
current value, and the difference compared with the thresholds.
•
startup direction —The alarm that may be sent when this entry is first set to valid. If the
first sample (after this entry becomes valid) is greater than or equal to the
rthreshold , and
direction is equal to rising or rising-falling , then a single rising alarm is generated. If the
first sample (after this entry becomes valid) is less than or equal to the
fthreshold , and
direction is equal to falling or rising-falling , then a single falling alarm is generated.
•
owner name —Enter a name that specifies who configured this alarm. If unspecified, the
name is an empty string.
Default Configuration
The following parameters have the following default values:
•
type type —If unspecified, the type is absolute .
•
startup direction —If unspecified, the startup direction is rising-falling .
Command Mode
Global Configuration mode
User Guidelines
• There are no user guidelines for this command.
Example
The following example configures the following alarm conditions:
• Alarm index—1000
•Variable
identifier—dell
• Sample interval—360000 seconds
• Rising threshold—1000000
• Falling threshold—1000000
• Rising threshold event index—10
• Falling threshold event index—20
show rmon alarm-table
The show rmon alarm-table User EXEC mode command displays the alarms summary table.
Console (config)# rmon alarm 1000 dell 360000 1000000 1000000 10
20