Switch User Manual

238 RMON Commands
www.dell.com | support.dell.com
The following table describes the significant fields shown in the display:
show rmon log
The show rmon log User EXEC mode command displays the RMON logging table.
Syntax
show rmon log [ event ]
•
event —Event index. (Range: 0 - 65535)
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
Console# show rmon events
Index Description Type Community Owner Last time sent
----- ----------- -------- --------- ------- --------------------
1 Errors Log CLI Jan 18 2002 23:58:17
2 High
Broadcast
Log-Trap device Manager Jan 18 2002 23:59:48
Field Description
Index An index that uniquely identifies the event.
Description A comment describing this event.
Type The type of notification that the device generates about this event. Can have the
following values: none, log, trap, log-trap. In the case of log, an entry is made in
the log table for each event. In the case of trap, an SNMP trap is sent to one or
more management stations.
Community If an SNMP trap is to be sent, it is sent to the SNMP community specified by this
octet string.
Owner The entity that configured this event.
Last time sent The time this entry last generated an event. If this entry has not generated any
events, this value is zero.