Switch User Manual

SNMP Commands 243
User Guidelines
• You can enter this command multiple times for the same view record.
• The number of views is limited to 64.
• "Default" and "DefaultSuper" views exist. Those views are used by the software internally and
can't be deleted or modified.
Example
The following example creates a view that includes all objects in the MIB-II system group except
for sysServices (System 7) and all objects for interface 1 in the MIB-II interfaces group:
snmp-server filter
To create or update a filter entry, use the snmp-server filter global configuration command. To
remove the specified Simple Network Management Protocol (SNMP) server filter entry, use the
no
form of this command.
Syntax
snmp-server filter filter-name oid-tree { included | excluded }
no snmp-server filter filter-name [ oid-tree ]
•
filter-name — Label for the filter record that you are updating or creating. The name is
used to reference the record. (Range: Up to 30 characters).
•
oid-tree — Object identifier of the ASN.1 subtree to be included or excluded from the
view. To identify the subtree, specify a text string consisting of numbers, such as
1.3.6.2.4 ,
or a word, such as
system . Replace a single subidentifier with the asterisk (*) wildcard to
specify a subtree family; for example 1.3.*.4.
•
included — The filter type is included.
•
excluded — The filter type is excluded.
Default Configuration
Product specific.
Command Modes
Global Configuration
Console (config)#
snmp-server view user-view system included
Console (config)#
snmp-server view user-view system.7 excluded
Console (config)#
snmp-server view user-view ifEntry.*.1 include