Manualshelf

Switch User Manual

ManualsBrandsDell ManualsSwitchPowerConnect 5324
241242243244245246247248249250
SNMP Commands 245
Syntax
snmp-server location
text
no snmp-server location
•
text
—Character string, up to 160 characters, describing the system location.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
• Do not include spaces in the text string.
Example
The following example sets the device location as "New_York".
snmp-server enable traps
The
snmp-server enable traps
Global Configuration mode command enables the switch to send
SNMP traps. To disable SNMP traps use the
no
form of the command.
Syntax
snmp-server enable traps
no snmp-server enable traps
Default Configuration
Enabled
Command Mode
Global Configuration mode
User Guidelines
• There are no user guidelines for this command.
Examples
The following example displays the command to enable SNMP traps.
Console (config)# snmp-server location New_York
Console (config)# snmp-server enable traps