Switch User Manual

Command Groups 25
Configuration and Image Files Commands
sntp authenticate Grants authentication for received Network
Time Protocol (NTP) traffic from servers.
Global
Configuration
sntp trusted-key
Authenticates the identity of a system to which
Simple Network Time Protocol (SNTP) will
synchronize.
Global
Configuration
sntp client poll timer
Sets the polling time for the Simple Network
Time Protocol (SNTP) client.
Global
Configuration
sntp broadcast client
enable
Enables the Simple Network Time Protocol
(SNTP) broadcast clients.
Global
Configuration
sntp anycast client enable
Enables Anycast clients. Global
Configuration
sntp client enable
(interface)
Enables the Simple Network Time Protocol
(SNTP) client on an interface.
Interface
Configuration
sntp unicast client enable
Enables the device to use the Simple Network
Time Protocol (SNTP) to request and accept
Network Time Protocol (NTP) traffic from
servers.
Global
Configuration
sntp unicast client poll
Enables polling for the Simple Network Time
Protocol (SNTP) predefined unicast clients.
Global
Configuration
sntp server
Configures the device to use the Simple
Network Time Protocol (SNTP) to request and
accept Network Time Protocol (NTP) traffic
from a server.
Global
Configuration
show clock
Displays the time and date from the system
clock.
User EXEC
show sntp configuration
Shows the configuration of the Simple Network
Time Protocol (SNTP).
Privileged User
EXEC
show sntp status
Shows the status of the Simple Network Time
Protocol (SNTP).
Privileged User
EXEC
Command Group Description Access Mode
delete startup-config
Deletes the startup-config file. Privileged User
EXEC
copy Copies files from a source to a destination. Privileged User
EXEC
boot system Specifies the system image that the device loads at
startup.
Privileged User
EXEC