Switch User Manual

Command Groups 27
GVRP Commands
set interface active Reactivates an interface that was suspended by the
system.
Privileged User
EXEC
show interfaces
configuration
Displays the configuration for all configured
interfaces.
User EXEC
show interfaces status Displays the status for all configured interfaces. User EXEC
show interfaces
description
Displays the description for all configured interfaces. User EXEC
show interfaces counters Displays traffic seen by the physical interface. User EXEC
show ports jumbo-frame Displays the jumbo frames configuration. User EXEC
port storm-control
include-multicast
Enables the device to count multicast packets. Global
Configuration
port storm-control
broadcast enable
Enables broadcast storm control. Interface
Configuration
port storm-control
broadcast rate
Configures the maximum broadcast rate. Interface
Configuration
show ports storm-control Displays the storm control configuration. Privileged User
EXEC
Command Group Description Mode
gvrp enable (global) Enables GVRP globally. Global
Configuration
gvrp enable (interface) Enables GVRP on an interface. Interface
Configuration
garp timer Adjusts the GARP application join, leave, and
leaveall GARP timer values.
Interface
Configuration
gvrp vlan-creation-forbid Enables or disables dynamic VLAN creation. Interface
Configuration
gvrp registration-forbid De-registers all VLANs, and prevents dynamic
VLAN registration on the port.
Interface
Configuration
clear gvrp statistics Clears all the GVRP statistics information. Privileged User
EXEC
show gvrp configuration Displays GVRP configuration information. User EXEC
show gvrp statistics Displays GVRP statistics. User EXEC
show gvrp error-statistics Displays GVRP error statistics. User EXEC