Switch User Manual

274 Spanning-Tree Commands
www.dell.com | support.dell.com
Default Setting
The default configuration revision number is 0.
Command Mode
MST Configuration mode
User Guidelines
• There are no user guidelines for this command.
Example
The following example sets the configuration revision to 1.
show (mst)
The show MST Configuration mode command displays the current or pending MST region
configuration.
Syntax
show {current | pending}
• current — Indicates the current region configuration.
•
pending — Indicates the pending region configuration.
Default Setting
This command has no default configuration.
Command Mode
MST Configuration mode
User Guidelines
• The pending MST region configuration takes effect only after exiting the MST configuration
mode.
Example
The following example displays a pending MST region configuration.
Console(config) # spanning-tree mst configuration
Console(config-mst) # revision 1
Console(config-mst)# show pending
Pending MST configuration