Switch User Manual

314 System Management
www.dell.com | support.dell.com
Examples
The following example displays a ping to IP address 10.1.1.1.
traceroute
The traceroute User EXEC mode command discovers the routes that packets will actually take
when traveling to their destination.
Syntax
traceroute ip-address | hostname [ size packet_size ] [ ttl max-ttl ] [ count packet_count ]
[
timeout time_out ] [ source ip-address ] [ tos tos ]
•
ip-address— IP address of the destination host. (Range: Valid IP Address)
•
hostname— Hostname of the destination host (Range: 1 - 158 characters)
•
size packet_size— Number of bytes in a packet. (Range: 40-1472)
•
ttl max-ttl— The largest TTL value that can be used. The traceroute command
terminates when the destination is reached or when this value is reached. (Range:1-255)
•
count packet_count— The number of probes to be sent at each TTL level. (Range:1-10)
•
timeout time_out— The number of seconds to wait for a response to a probe packet.
(Range:1-60)
Console> ping 10.1.1.1
Pinging 10.1.1.1 with 64 bytes of data:
64 bytes from 10.1.1.1: icmp_seq=0. time=11 ms
64 bytes from 10.1.1.1: icmp_seq=1. time=8 ms
64 bytes from 10.1.1.1: icmp_seq=2. time=8 ms
64 bytes from 10.1.1.1: icmp_seq=3. time=7 ms
----10.1.1.1 PING Statistics----
4 packets transmitted, 4 packets received, 0% packet loss
round-trip (ms) min/avg/max = 7/8/11