Switch User Manual

326 System Management
www.dell.com | support.dell.com
Default Configuration
This command has no default configuration. No asset tag is defined by default.
Command Mode
Global Configuration mode
User Guidelines
• There are no user guidelines for this command.
Example
The following example specifies the device asset tag as "1qwepot".
show system id
The show system id User EXEC mode command displays the ID information.
Syntax
show system id
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
• The tag information is on a device by device basis.
Example
The following example displays the system service tag information.
Console (config)# asset-tag 1qwepot
Console> show system id
Service Tag: 89788978
Serial number: 8936589782
Asset tag: 7843678957