Switch User Manual

Command Groups 33
Radius Commands
qos trust (Global) Configures the system to basic mode and the "trust"
state.
Global
Configuration
qos trust (Interface)
Enables each port trust state Interface
Configuration
qos cos Configures the default port CoS value. Interface
Configuration
show qos map Displays all the maps for QoS. User EXEC
Command Group Description Access Mode
radius-server host Specifies a RADIUS server host. Global
Configuration
radius-server key Sets the authentication and encryption key for all
RADIUS communications between the router and the
RADIUS daemon.
Global
Configuration
radius-server
retransmit
Specifies the number of times the software searches the
list of RADIUS server hosts.
Global
Configuration
radius-server source-ip Specifies the source IP address used for communication
with RADIUS servers.
Global
Configuration
radius-server timeout Sets the interval for which a router waits for a server host
to reply.
Global
Configuration
radius-server deadtime Improves RADIUS response times when servers are
unavailable.
Global
Configuration
show radius-servers Displays the RADIUS server settings. Privileged User
EXEC