Switch User Manual

340 VLAN Commands
www.dell.com | support.dell.com
User Guidelines
• There are no user guidelines for this command.
Example
The following example VLAN number 1972 is created.
default-vlan disable
The default-vlan disable VLAN Configuration mode command disables the default VLAN
functionality. Use the
no form of this command to enable the default VLAN functionality.
Syntax
default-vlan disable
no default-vlan disable
This command has no keywords or arguments.
Default Configuration
Enabled
Command Modes
VLAN Configuration mode
User Guidelines
• There are no user guidelines for this command.
Examples 1
interface vlan
The interface vlan Global Configuration mode command enters the interface configuration
(VLAN) mode.
Syntax
interface vlan vlan-id
• vlan-id —The ID of an existing VLAN (excluding GVRP dynamic VLANs).
Console (config)# vlan database
Console (config-vlan)# vlan 1972
Console# vlan database
Console(config-vlan)# default-vlan disable