Switch User Manual

Command Modes 45
Command Modes
GC (Global Configuration) Mode
Command Description
aaa authentication enable Defines authentication method lists for accessing higher privilege
levels.
aaa authentication login Defines login authentication.
aaa authentication dot1x Specifies one or more authentication, authorization, and accounting
(AAA) methods for use on interfaces running IEEE 802.1X.
arp Adds a permanent entry in the ARP cache.
arp timeout Configures how long an entry remains in the ARP cache
asset-tag Specifies the device asset-tag.
bridge aging-time Sets the address table aging time.
bridge multicast filtering Enables filtering of multicast addresses.
clock source Configures an external time source for the system clock.
clock timezone Sets the time zone for display purposes
clock summer-time Configures the system to automatically switch to summer time
(daylight saving time).
crypto certificate generate Generates a HTTPS certificate.
crypto certificate import Imports a certificate signed by Certification Authority for HTTPS.
crypto key generate dsa Generates DSA key pairs.
crypto key generate rsa Generates RSA key pairs.
crypto key pubkey-chain ssh Enters SSH Public Key-chain configuration mode.
dot1x system-auto-control Enables 802.1x globally.
enable password Sets a local password to control access to normal and privilege levels.
end Ends the current configuration session and returns to the previous
command mode.
gvrp enable (global) Enables GVRP globally.
hostname Specifies or modifies the device host name.
interface ethernet Enters the interface configuration mode to configure an Ethernet type
interface.
interface port-channel Enters the interface configuration mode of a specific port-channel.