Switch User Manual

74 AAA Commands
www.dell.com | support.dell.com
Example
The following example sets a local level 15 password "secret" to control access to user and privilege
levels.
username
The username Global Configuration mode command establishes a username-based authentication
system. To remove a user name use the
no form of this command.
Syntax
username name [ password password ] [ level level ] [ encrypted ]
no username name
• name —The name of the user. (Range: 1 - 20 characters)
•
password —The authentication password for the user. (Range: 1 - 159 characters).
•
level —The user level (Range: 1 -15).
•
encrypted —Encrypted password entered, copied from another device configuration.
Default Configuration
No user is defined.
Command Mode
Global Configuration mode
User Guidelines
• No password is required.
Example
The following example configures user "bob" with the password "lee" and user level 15 to the
system.
show users accounts
The show users accounts Privileged EXEC mode command displays information about the local
user database.
Console (config)# enable password level 15 secret
Console (config)# username bob password lee level 15