Switch User Manual

Clock 99
Default Configuration
1024
Command Mode
Global configuration mode
User Guidelines
• There are no user guidelines for this command.
Examples
The following example sets the polling time for the Simple Network Time Protocol (SNTP) client
to 120 seconds.
sntp broadcast client enable
The sntp broadcast client enable Global Configuration mode command enables the Simple
Network Time Protocol (SNTP) broadcast clients. To disable the SNTP broadcast clients, use the
no form of this command.
Syntax
sntp broadcast client enable
no sntp broadcast client enable
This command has no arguments or keywords.
Default Configuration
Disabled
Command Mode
Global configuration mode
User Guidelines
• The sntp broadcast client enable Interface Configuration mode command enables the device
to receive broadcast transmissions globally and on ALL interfaces.
• Use the
sntp client enable Interface Configuration mode command to enable the SNTP
client on a specific interface.
Examples
The following example enables the SNTP broadcast clients.
Console (config)# sntp client poll timer 120
Console (config)# sntp broadcast client enable