Owner's Manual

108 Clock
www.dell.com | support.dell.com
Syntax
sntp client enable
no sntp client enable
Default Configuration
Client is disabled on an interface.
Command Mode
Interface Configuration (Ethernet, port-channel, VLAN) mode
User Guidelines
Use the sntp broadcast client enable global configuration command to enable Broadcast
clients globally.
Use the
sntp anycast client enable global configuration command to enable Anycast clients
globally.
Examples
The following example enables SNTP Broadcast and Anycast clients on the interface.
sntp unicast client enable
The sntp unicast client enable global configuration command enables clients to use Simple
Network Time Protocol (SNTP) predefined Unicast clients. To disable SNTP Unicast clients, use
the
no form of this command.
Syntax
sntp unicast client enable
no sntp unicast client enable
Default Configuration
The SNTP Unicast clients are disabled.
Command Mode
Global Configuration mode
User Guidelines
Use the sntp server command to define SNTP servers.
Console(config-if)# sntp client enable