Owner's Manual

IP Addressing Commands 171
User Guidelines
There are no user guidelines for this command.
Example
The following example defines a default domain name of dell.com:
ip name-server
The ip name-server global configuration command defines available name servers. To delete a
name server, use the
no form of this command.
Syntax
ip name-server server-address1 [ server-address2 … server-address8 ]
no ip name-server [ server-address1 … server-address8 ]
•
server-address —IP addresses of the name server. For information about specifying an Out-
of-Band IP address, see the user guidelines.
Default Configuration
No name server IP addresses are specified.
Command Mode
Global Configuraton mode
User Guidelines
Server preference is determined by entry order.
Up to 8 servers can be defined in one command or by using multiple commands.
To define a radius server on the out-of-band port, use the out-of-band IP address format:
oob/ ip-address.
Example
The following example sets the available name server:
ip host
The ip host global configuration command defines static host name-to-address mapping in the
host cache. To delete the name-to-address mapping, use the
no form of this command.
Console(config)# ip domain-name dell.com
Console(config)# ip name-server 176.16.1.18