Owner's Manual

198 LACP Commands
www.dell.com | support.dell.com
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the priority value for port g8 to 247.
lacp timeout
The lacp timeout interface configuration command assigns an administrative LACP timeout. To
reset the default administrative LACP timeout use the
no form of this command.
Syntax
lacp timeout { long | short }
no lacp timeout
• long —Specifies a long timeout value.
•
short —Specifies a short timeout value.
Default Configuration
The default port timeout value is long .
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example assigns an administrative LACP timeout for port g8 to a long timeout value.
show lacp ethernet
The show lacp ethernet privileged EXEC command displays LACP information for Ethernet ports.
Console (config)# interface ethernet g8
Console (config-if)# lacp port-priority 247
Console (config)# interface ethernet g8
Console (config-if)# lacp timeout long