Owner's Manual

220 Multicast Routing Commands
www.dell.com | support.dell.com
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays all ip mroutes.
The following example displays all ip mroutes for source at IP address 192.92.37.100.
Console# show ip mroute
Group Source Upstream Interface Up Time Owner
----------- ----------------- ------------ ----------- --------- --------
224.0.255.1 198.92.37.100/32 10.20.37.33 eth g1 20:20:00 dvmrp
224.0.255.1 199.92.37.100/32 10.20.37.33 eth g1 1d:4h:20m dvmrp
224.1.255.1 198.92.37.100/32 10.20.37.33 eth g1 21:20:00 dvmrp
224.1.255.1 199.92.37.100/32 10.20.37.33 eth g1 1d:5h:20m dvmrp
224.8.255.1 179.82.17.200/32 10.20.37.33 vlan127 1w:1d:2h dvmrp
224.8.255.1 179.82.17.200/32 10.20.37.33 vlan128 3m:2w:2d dvmrp
224.8.255.1 179.82.17.200/32 10.20.37.33 vlan129 1y:2m:2w dvmrp
224.9.255.1 179.82.17.200/32 10.20.37.33 p-c 7 1d:5h:20m dvmrp
Console# show ip mroute source 198.92.37.100
Group Source Upstream Interface Up Time Expiry Time Owner
---------------------------------------------- --------------------
224.0.255.1 198.92.37.100/32 10.20.37.33 eth g1 20:20:00 0:02:55 dvmrp
224.1.255.1 198.92.37.100/32 10.20.37.33 eth g1 21:20:00 0:02:55 dvmrp