Owner's Manual

Multicast Routing Commands 223
The following table describes the fields shown in the display:
show ip dvmrp interface
The show ip dvmrp interface user EXEC command displays DVMRP interface information.
Syntax
show ip dvmrp interface [ ethernet interface-number | vlan vlan-id | port-channel number ]
•
ethernet interface-number —Ethernet port number.
•
vlan vlan-id —VLAN number.
•
port-channel number —Port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Field Description
Group IP Multicast group address.
Source The network address that identifies the sources.
Interface The outgoing interface.
Up time The time since the Multicast routing information was learned by the router.
Expiry time The minimum amount of time remaining before this entry is aged out. If the
state is pruned, the remaining time until the prune expires and the state reverts
to forwarding. Otherwise, the remaining time until this entry is removed from
the table.
State An indication of whether the outgoing interface and next-hop represented by
this entry is currently being used to forward IP datagrams, or is currently
pruned.
Owner The routing mechanism via which this next-hop was learned.