Owner's Manual

Multicast Routing Commands 227
Example
The following example displays DVMRP-next-hop information.
The following table describes the fields shown in the display:
show ip dvmrp route
The show ip dvmrp route user EXEC command displays the Distance Vector Multicast Routing
Protocol (DVMRP) routing table contents.
Syntax
show ip dvmrp route [ ip-address ]
•
ip-address —IP address of an entry in the DVMRP routing table.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Console# show ip dvmrp next-hop
Source Interface Hop Type
--------------- --------- --------
198.92.37.100/32 eth g2 Leaf
Field Description
Source The network address identifying the sources.
Interface The outgoing interface.
Hop Type Type is Leaf if no downstream dependent neighbors exist on the outgoing
virtual interface. Otherwise, type is Branch.