Owner's Manual

26 Command Groups
www.dell.com | support.dell.com
NOTE: The access mode shown in the following tables is indicated by these abbreviations: UE (User
EXEC Mode), PE (Privileged EXEC Mode), GC (Global Configuration Mode), IC (Interface Configuration
Mode), LC (Line Configuration) MA (Management Access-level), KC (Key Chain), KE (Key), VC (VLAN
Configuration), ML (MAC-List Configuration), MT (MAC-acl), SP (SSH Public Key), SK (SSH Public Key-
chain), PM (Policy Map Configuration), OV (OSPF Virtual Link), IP (IP Access List Configuration) and MC
(MST Configuration Mode).
Line Configures the console and remote Telnet connection.
Management ACL Configures and displays management access-list information.
Multicast Routing Configures Multicast routing.
OSPF Configures and manages OSPF on the device.
PHY Diagnostics Diagnoses and displays the interface status.
Port Channel Configures and displays Port channel information.
Port Monitor Monitors activity on specific target ports.
QoS Configures and displays QoS information.
RADIUS Configures and displays RADIUS information.
RIP Configures RIP.
RMON Displays RMON statistics.
SNMP Configures SNMP communities, traps and displays SNMP information.
Spanning Tree Configures and reports on Spanning Tree protocol.
SSH Configures SSH authentication.
Syslog Commands Manages and displays syslog messages.
System Management Configures the device clock, name and authorized users.
TACACS+ Configures and displays TACACS+ information.
User Interface Describes user commands used for entering CLI commands.
VLAN Configures VLANs and displays VLAN information.
VRRP Configures and manages VRRP on the device.
Web Server Configures Web based access to the device.
802.1x Configures commands related to 802.1x security protocol