Owner's Manual

286 QoS Commands
www.dell.com | support.dell.com
User Guidelines
There are no user guidelines for this command.
Example
The following example displays a device where basic mode is supported.
priority-queue out num-of-queues
The priority-queue out num-of-queues global configuration command enables the egress queues
to be expedite queues. To disable the expedite queue, which disables all the strict priority queues
and returns the queues to strict priority mode, use the
no form of this command.
Syntax
priority-queue out num-of-queues number-of-queues
no priority-queue out num-of-queues
• number-of-queues —Assign the number of queues to be expedite queues. The expedite
queues would be the queues with higher indexes. The range is 0 – 8.
Default Configuration
All queues are expedite queues.
Command Mode
Global Configuration mode
User Guidelines
When configuring the priority-queue out num-of-queues command, the weighted round
robin (WRR) weight ratios are affected because there are fewer queues participating in WRR.
Example
The following example sets queue 7, 8 to be an EF queue.
Console# show qos
Qos: basic
Basic trust: dscp
Console (config)# priority-queue out num-of-queues 2