Owner's Manual

QoS Commands 289
User Guidelines
The packet refers to a threshold by the conformance level. Weighted round robin queues
should be defined on the interface.
A weight between 6 and 255 may be specified. A weight of 0 may also be specified for all
queues except queue 8. Note that specifying a weight of 0 is not recommended because it
closes the queue.
Example
The following example sets queue weights as follows:
• Queue 1—6
• Queue 2—6
• Queue 3—6
• Queue 4—6
• Queue 5—6
• Queue 6—6
• Queue 7—6
• Queue 8—6
wrr-queue
The wrr-queue interface configuration command defines the wrr-queue mechanism on an egress
queue. Use the
no form of the command to define the default thresholds.
Syntax
wrr-queue { tail-drop }
no wrr-queue
• tail-drop —Tail-drop mechanism.
Default Configuration
The system default is tail-drop mechanism with 100% for all thresholds.
Command Mode
Interface Configuration mode.
User Guidelines
There are no user guidelines for this command.
Console (config-if)# wrr-queue bandwidth 6 6 6 6 6 6 6 6