Owner's Manual

294 QoS Commands
www.dell.com | support.dell.com
The following example displays output from the show qos interface g1 policers command.
qos map dscp-queue
The qos map dscp-queue global configuration command modifies the DSCP to CoS map. To
return to the default map, use the
no form of this command.
Syntax
qos map dscp-queue dscp-list to queue-id
no qos map dscp-queue
• dscp-list —Specify up to 8 DSCP values, separate each DSCP with a space.
(Range: 0 - 63)
•
queue-id —Enter the queue number to which the DSCP value corresponds.
Console# show qos interface ethernet g1 policers
Ethernet g1
Class map: A
Policer type: aggregate
Committed rate: 192000 bps
Committed burst: 9600 bytes
Exceed-action: policed-dscp-transmit
Class map: B
Policer type: single
Committed rate: 192000 bps
Committed burst: 9600 bytes
Exceed-action: drop
Class map: C
Policer type: none
Committed rate: N/A
Committed burst: N/A
Exceed-action: N/A