Owner's Manual

QoS Commands 305
• aggregate - policer-name —The aggregate policer name being displayed.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the aggregate policer called "policer1".
qos map policed-dscp
The qos map policed-dscp global configuration command modifies the policed-DSCP map for
remarking purposes. To return to the default map, use the
no form of this command.
Syntax
qos map policed-dscp dscp-list to dscp-mark-down
no qos map policed-dscp
• dscp- list —Specifies up to 8 DSCP values separated by spaces. (Range: 0 - 63)
•
dscp-mark-down —Specifies the DSCP value to mark down. (Range: 0 - 63)
Default Configuration
The default map is the "Null" map, which means that each income DSCP value is mapped to
the same DSCP value.
Command Mode
Global Configuration mode
User Guidelines
The DSCP cannot be remapped to 3, 11, 19, ...
Console# show qos aggregate-policer policer1
aggregate-policer policer1 96000 4800 exceed-action drop
not used by any policy map