Owner's Manual

SNMP Commands 349
SNMP Commands
SNMP General Commands
snmp-server contact
The snmp-server contact global configuration command sets up a system contact. To remove the
system contact information, use the
no form of the command.
Syntax
snmp-server contact text
no snmp-server contact
• text —Character string, up to 160 characters, describing the system contact information.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
Do not include spaces in the text string.
Example
The following example displays setting up the system contact point as "Dell_Technical_Support".
snmp-server location
The snmp-server location global configuration command sets up information on where the device
is located. To remove the location string use, the
no form of this command.
Syntax
snmp-server location text
no snmp-server location
• text —Character string, up to 160 characters, describing the system location.
Default Configuration
This command has no default configuration.
Console (config)# snmp-server contact Dell_Tecnical_Support