Owner's Manual

Command Groups 35
LACP Commands
Line Commands
Management ACL Commands
Command Group Description Mode
lacp system-priority Configures the system LACP priority. GC
lacp port-priority Configures the priority value for physical ports. IC
lacp timeout Assigns an administrative LACP timeout. IC
show lacp ethernet Displays LACP information for Ethernet ports. PE
show lacp port-channel Displays LACP information for a port-channel. PE
Command Group Description Mode
line Identifies a specific line for configuration and enters the line
configuration command mode.
LC
speed Sets the line baud rate. LC
exec-timeout Configures the interval that the system waits until user input is
detected.
LC
terminal history
Enables the command history function for the current terminal session. UE
terminal history size Defines the command history buffer size for the current terminal
session.
UE
show line Displays line parameters. UE
Command Group Description Mode
management access-list Defines a management access-list, and enters the access-list for
configuration.
GC
permit (management) Defines a permit rule. MA
deny (management) Defines a deny rule. MA
management access-class Defines which management access-list is used. GC
show management access-list Displays management access-lists. PE
show management access-class Displays the active management access-list. PE