Owner's Manual

350 SNMP Commands
www.dell.com | support.dell.com
Command Mode
Global Configuration mode
User Guidelines
Do not include spaces in the text string.
Example
The following example sets the device location as "New_York".
snmp-server enable traps
The snmp-server enable traps global configuration command enables the switch to send SNMP
traps. To disable SNMP traps use the
no form of the command.
Syntax
snmp-server enable traps
no snmp-server enable traps
Default Configuration
Traps are enabled by default.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays the command to enable SNMP traps.
snmp-server trap authentication
The snmp-server trap authentication global configuration command enables the switch to send
Simple Network Management Protocol traps when authentication fails. To disable SNMP
authentication failed traps, use the
no form of this command.
Syntax
snmp-server trap authentication
Console (config)# snmp-server location New_York
Console (config)# snmp-server enable traps