Owner's Manual

36 Command Groups
www.dell.com | support.dell.com
Multicast Routing
OSPF
Command Group Description Mode
ip multicast-routing Enables IP Multicast routing on the device. GC
ip dvmrp Enables DVMRP on an interface. IC
ip dvmrp metric Configures the interface metric for DVMRP reports. IC
ip igmp Enables IGMP on an interface. IC
ip igmp query-interval Configures the frequency at which the software sends IGMP host
query messages.
IC
ip igmp last-member-query-
interval
Configures the frequency at which the software sends Internet IGMP
group-specific host query messages.
IC
ip igmp query-max-response-
time
Configures the maximum response time advertised in IGMP queries. IC
ip igmp version Configures which version of IGMP the router uses. IC
ip igmp static-group Configures the router to be a statically connected member of the
specified group on the interface.
IC
show ip mroute Displays the IP Multicast routing table contents. UE
show ip mroute-next-hop Displays IP Multicast routing next hop information. UE
show ip dvmrp interface Displays DVMRP interface information. UE
show ip dvmrp neighbor Displays DVMRP-neighbor information on a per-interface basis. UE
show ip dvmrp next-hop Displays DVMRP-next-hop information on a per-interface basis. UE
show ip dvmrp route Displays the DVMRP routing table contents. UE
show ip dvmrp prune Displays the DVMRP upstream prune state. UE
show ip igmp interface Displays IGMP related information about an interface. UE
show ip igmp groups Displays the Multicast groups with receivers that are directly
connected to the router, and that were learned through IGMP.
UE
Command Group Description Mode
router ospf enable Enables OSPF on the device. GC
router ospf area Defines an OSPF area on the device. GC
router ospf redistribute rip Advertises routes, that are learned by the RIP process, while running
OSPF.
GC
router ospf redistribute static Advertises routes, configured statically, while running OSPF. GC