Owner's Manual

366 SNMP Commands
www.dell.com | support.dell.com
User Guidelines
A user and notification view are not automatically created. Use the snmp-server user , snmp-
server group
and snmp-server user global configuration commands to generate a user, group
and notify group, respectively.
To define an SNMP recipient on the out-of-band port, use the out-of-band IP address format
oob/ ip-address .
NOTE: The type of trap (i.e trap, notification or inform) depends on how the trap receiver has been
configured.
Example
The following example configures an SNMPv3 host.
show snmp engineID
The show snmp engineID privileged EXEC command displays the ID of the local Simple Network
Management Protocol (SNMP) engine.
Syntax
show snmp engineID
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the SNMP engine ID.
Console (config)# snmp-server v3-host 192.168.0.20 john
Console # show snmp engineID
Local SNMP engineID: 08009009020C0B099C075878