Owner's Manual

42 Command Groups

www.dell.com | support.dell.com

Spanning Tree Commands

snmp-server user Creates or updates an SNMP server view entry. GC

snmp-server group Configures a new SNMP group or a table that maps SNMP users to

SNMP views.

snmp-server user Configures a new SNMP Version 3 user. GC

snmp-server v3-host Specifies the SNMP engine ID on the local device. GC

snmp-server filter Creates or updates an SNMP server filter entry. GC

snmp-server v3-host Specifies the recipient of SNMPv3 notifications. GC

show snmp Displays the SNMP status. PE

show snmp engineID Displays the SNMP engine ID. PE

show snmp users Displays the configuration of views. PE

show snmp groups Displays the configuration of groups. PE

show snmp filters Displays the configuration of filters. PE

show snmp users Displays the configuration of users. PE

Command Group Description Mode

spanning-tree Enables spanning tree functionality. GC

spanning-tree mode Configures the spanning tree protocol. GC

spanning-tree forward-time Configures the spanning tree bridge forward time. GC

spanning-tree hello-time Configures the spanning tree bridge Hello Time. GC

spanning-tree max-age Configures the spanning tree bridge maximum age. GC

spanning-tree priority Configures the spanning tree priority. GC

spanning-tree disable Disables spanning tree on a specific port. IC

spanning-tree cost Configures the spanning tree path cost for a port. IC

spanning-tree pathcost method Configures the spanning tree default pathcost method GC

spanning-tree port-priority Configures port priority. IC

spanning-tree portfast Enables PortFast mode. IC

spanning-tree link-type Overrides the default link-type setting. IC

spanning-tree bpdu Defines BPDU handling when spanning tree is disabled on an

interface.

clear spanning-tree detected-

protocols

Restarts the protocol migration process on all interfaces or on the

specified interface.