Owner's Manual

Command Groups 45
TACACS+ Commands
User Interface Commands
traceroute Discovers the IP routes that packets actually take when travelling to
their destinations.
UE
telnet Logs into a host that supports Telnet. UE
resume Switches to another open Telnet session. UE
Command Group Description Mode
tacacs-server host Specifies a TACACS+ server host. GC
tacacs-server key Sets the authentication and encryption key for all TACACS+
communications between the switch and the TACACS+ daemon.
GC
tacacs-server source-ip Specifies the source IP address used for communication with
TACACS+ servers.
GC
tacacs-server timeout Sets the interval for which the switch waits for a server host to reply. GC
show tacacs Displays TACACS+ server settings and statistics. PE
Command Group Description Mode
enable Enters the privileged EXEC mode. UE
disable Returns to User EXEC mode. PE
login Changes a login username. UE
exit(configuration) Exits any configuration mode to the previously highest mode in the
CLI mode hierarchy.
(All)
exit(EXEC) Closes an active terminal session by logging off the device. UE
end Ends the current configuration session and returns to the previous
command mode.
GC
help Displays a brief description of the help system. (All)
history Enables the command history function. LC
history size Changes the command history buffer size for a particular line. LC
debug-mode Switches the mode to debug. PE
show history Lists the commands entered in the current session. UE
show privilege Displays the current privilege level. UE