Owner's Manual

464 VLAN Commands
www.dell.com | support.dell.com
• group —Group number as defined in the map protocol protocols-group command.
(Range: 1 - 2147483647)
•
vlan-id —Define the VLAN ID in the classifying rule.
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example sets a protocol-based classification rule of protocol group 1 to VLAN 8.
show vlan
The show vlan privileged EXEC command displays VLAN information.
Syntax
show vlan [ tag vlan-id | name vlan-name ]
•
vlan-id —A valid VLAN ID
•
vlan-name —A valid VLAN name string. (Range: 1 - 32 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays all VLAN information.
Console (config)# interface ethernet g8
Console (config-if)# switchport general map protocols-group 1 vlan
8