Owner's Manual

470 VRRP Commands
www.dell.com | support.dell.com
Default Configuration
VRRP is disabled
Command Mode
Interface configuration (Ethernet, VLAN, port-channel)
User Guidelines
This command cannot be used with a range of ports.
Example
The following example enables VRRP number 45 on port g8.
vrrp timer
The vrrp timer interface configuration command configures the time between sending
advertisements messages. To restore the timer to its default value, use the
no form of this
command.
Syntax
vrrp virtual-router timer seconds
no vrrp virtual-router timer
•
virtual-router —Virtual router number. (Range: 1 - 255)
•
seconds —The time interval, in seconds, between sending advertisements messages
(Range: 1 - 255).
Default Configuration
The default time interval between sending advertisements messages is 1 second.
Command Mode
Interface configuration (Ethernet, VLAN, port-channel)
User Guidelines
This command cannot be used with a range of ports.
Console(config)# interface ethernet g8
Console(config-if)# vrrp 45 up