Owner's Manual

474 VRRP Commands
www.dell.com | support.dell.com
Syntax
show vrrp configuration [ ethernet interface-number | vlan vlan-id | port-channel number ]
•
ethernet interface-number —Ethernet port number.
•
vlan vlan-id —VLAN number.
•
port-channel number —Port-channel number.
Default Configuration
There are no user guidelines for this command.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the VRRP configuration.
The following table describes the significant fields shown in the display:
Console# show vrrp configuration
Interface VRID Address Priority Timer Auth Preempt Source-ip
State
--------- ---- --------------- -------- ----- ---- ------- --------------
g1 10 1.1.1.99 100 1 No Yes 0.0.0.0
down
Field Description
Interface Interface type and number.
VRID Virtual Router Identifier.
Address Virtual Router associated address.
Priority Priority used for the virtual router master election.
Timer The time interval, in seconds, between sending advertisement messages.
Auth Displays if authentication is used.
Preempt Displays whether a higher priority virtual router preempts a lower priority
master.
Source-ip Source IP address used in the VRRP messages.
State Displays if the virtual router is up or down.