Owner's Manual

802.1x Commands 497
show dot1x users
The show dot1x users privileged EXEC command displays 802.1x users for the device.
Syntax
show dot1x users [ username username ]
•
username — Supplicant username (Range: 1- 160 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Max req The maximum number of times that the device sends an Extensible
Authentication Protocol (EAP)-request frame (assuming that no
response is received) to the client before restarting the authentication
process.
Supplicant timeout Time in seconds the device waits for a response to an EAP-request
frame from the client before resending the request.
Server timeout Time in seconds the device waits for a response from the authentication
server before resending the request.
Session Time How long the user is logged in.
MAC address The supplicant MAC address.
Authentication Method The authentication method used to establish the session.
Termination Cause The reason for the session termination.
State The current value of the Authenticator PAE state machine and of the
Backend state machine.
Authentication success Counts the number of times the state machine has received Success
message from the Authentication Server.
Authentication fails Counts the number of times the state machine has received Failure
message from the Authentication Server.